How to Make the Heat Press Remain in Top Condition & How to Clean It

  • 0

How to Make the Heat Press Remain in Top Condition & How to Clean It

how to clean a heat pressA functional heat press is a profitable heat press. it is a possibility that you encountered some troubles when using it. You could mistakenly print the transfers upside down. There could also be adhesive residues on the platen. A heat press will inadvertently get dirty over the course of its operational life. There are a number of reasons for this to happen. It could also be wearing of the parts that make up the equipment. So you need to clean the machine in time. If you do not do this, your machine will be faulty.



How to Make the Heat Press Remain in Top Condition

1. Speed is good

There is no substitute for speed. Consider this scenario: you have mistakenly printed the plastisol heat transfer on the top of press and not on the shirt as it was actually intended. When you realize your mistake, it is important that you quickly remove the transfer. When the ink is exposed to high heat for a period of time, then it will get “cooked”. The transfer will then be extremely hard to remove. You will suffer material losses.

2. Reduce heat

The heat should be lowered. Accidents are more common than you think. You could suffer burns if you try to clean the press when the equipment temperature. If you see something printed not what it should be, turn the machine off quickly. Your intention is to clean the machine. There should be no kind of debris or any ink present on the equipment. You can cool the machine when it is warm. In fact a little warm is preferable as it will be easier for you to scrape off the adhesives or inks. You should not even touch a hot press. It will burn you. Protect yourself by wearing heatproof gloves or any comparable hand protection.


clean the heat press



How to Clean the Heat Press

Be gentle when cleaning the machine. Use soft cloth. If you do not have a proper cleaning cloth, use an old t-shirt. It should be non-abrasive. Use water and mild soap. A few heat presses could have platens coated with non-stick material. Use of an abrasive may result in the coating to be scratched off.

More information:
Company Name: FeiYue Digital Technology Co., Ltd
Address: No.323 Central Road, Nanjing, Jiangsu, China
Tel: 86-025-86628894
Fax: 86-025-86628894
Whatsapp: +86 18351865850

Search Here