TIPS ON ADDING INK INTO THE CATRIDGE OF INKJET PRINTER

  • 0

TIPS ON ADDING INK INTO THE CATRIDGE OF INKJET PRINTER

In the use of inkjet printers, adding ink is also a common operation. How much ink is left? What should I pay attention to when adding ink to the cartridge? Today, I will share with you the inking process needs to pay attention to matters.

Kiian sublimation ink

When you add ink, you should see if it completely damaged the ink cartridge. You can test it with water beforehand. If the ink is renewed, the original ink cartridge should be thoroughly cleaned, otherwise a chemical reaction will occur due to the mixing of two different inks, resulting in plugging.

Some users use the cleaning function on the machine for convenience. In fact, this is not good. It is best to wash it several times with water until you see clear water. When changing ink, it must be in moderation. Some users need to add ink to each other in order to save trouble. This will cause the ink cartridge to leak ink during use. And the leaked ink may wet the inside of the inkjet printer. The other parts are so damaged that the inkjet printer is damaged.

sublimation printingAfter loading the ink, it is best not to put the ink cartridge back into the cartridge holder, let it sit for a few minutes and then put it on, so that the ink will slowly penetrate into the corners of the sponge pad to ensure the ultimate print quality. Also, it is to avoid exposing the ink cartridge to the air for a long time, which is easy to produce dry clogging. Finally, remind the majority of inkjet printer users, do not wait until the ink is used up. It is best to add ink to the ink cartridge when there is 10% left in the ink. If you can’t see the remaining amount of ink, you have to observe the printing effect. I found that there is a broken line in the printed image and I should add ink.

We FeiYue Digital Technology Co., Ltd mainly manages sublimation paper, inkjet printer, digital printing inks, calendering machines and accessories, operating this industry has been more than 10 years experience. After continuous improvement of the product, to ensure product quality can also be profit at the same time to the minimum, to ensure that customers enjoy the best price and the best quality products.


  • 0

The Main Role of Common Accessories for Inkjet Printers

There are some common accessories in inkjet printers such as print head, ink cartridges, ink mats, ink stacks, ink sacs, scrapers, motors, copper sleeves, etc. These are the accessories in inkjet printers that we often use and see. Many failure of inkjet printers is easy to happen on these small accessories. As long as we are familiar with it to understand their functions and roles, we can easily find the cause and solve the problems encountered in inkjet printer printing.

print head1. The print head. The print head is a very important part in the inkjet printer. The quality of the print head directly affects the printout of the inkjet printer. The print quality of the print head also directly affects the color effect of the printed image and the clarity of the image. Most of the piezoelectric inkjet printers use Epson’s piezoelectric print head, such as Epson’s fifth-generation print head, etc. Epson’s piezoelectric print head has long service life, high printing accuracy, high printing speed, and stable use.

2. Ink cartridges. Ink cartridge for the inkjet printer is to provide continuous ink supply. In the design of the dual four-color inkjet printer, generally installed 8 ink cartridges, four groups of colors, two ink cartridges per color, respectively, ink blue yellow red four colors.

3. Ink sacs. Ink sac is generally located above the inkjet printer print head, connected between the print head and the ink tube. There is a filter in the ink sac. It can filter out impurities in the ink, to ensure smooth ink supply, prevent print head blockage, break line and other faults. It plays the role of ink filtering.

4. Ink mats. It located directly under the inkjet printer print hed, the right side of the entire machine. It mainly to protect the print head. The inkjet mat used by the macro printing presses will spray a certain amount of ink to the print head automatically to ensure that the print head is moist and not easily blocked.

inkjet printer5. The ink stack. The ink stack is located on the right side of the whole machine. Its main function is to suck out the residual ink in the spray hole to avoid the phenomenon of dry plugging and print head blockage caused by solvent evaporation and drying. The ink stack has a slider and a lifting point according to the movement mode. Generally speaking, the lifting ink stack cleaning print head is more thorough and the effect is better, so it is more suitable for application. The ink mats and ink stacks are combined to form the full automatic cleaning and moisturizing effect of the print head.

6. Scrapers. In the inkjet printer, it plays the role of cleaning the surface of the print head. It is generally installed under the inkjet printer print head, the left side of the ink stack. If the inkjet printer scraper is damaged, it can easily cause the inkjet printer to break the ink.

7. The motor. The motor is the main power supply core of the inkjet printer. Such as the paper motor, it controls the inkjet printer’s print paper, paper feed and paper ejection. Inkjet printer print head frame back and forth movement, also provided by the motor power. The quality of the motor directly affects the related operations of the inkjet printer. Such as overflow of the inkjet printer, excessive resistance and so on, all of which are caused by the motor failure.

 

More information:
Website: www.subli-star.com
Company Name: Fei Yue Digital Technology Co.,LTD
Address: Central Road 323, Nanjing, Jiangsu, China
E-mail: sales@subli-star.com
Tel: 86-025-86628894
Whatsapp: +86 18351865850


  • 0

The Common Misunderstandings in the Maintenance of Inkjet Printer Components

Inkjet printer is a relatively large-scale printing equipment, and it has many parts. So the partner who just came into contact may not know much about it and there will be some misunderstandings. The common misunderstandings of inkjet printers are as follows:

1. Ink cartridges can be used as long as they are not broken.

The sponge in the ink cartridge has a certain life span. When the sponge repeatedly repeats the process of “absorbing and releasing” the ink or after using it for a certain ink cartridgeperiod of time, the ink absorption capacity of the sponge will be reduced.

In addition, no matter how good the ink is filled, some impurities or dust are brought into the inside of the ink cartridge after multiple fillings. The dust will be carried to and adsorbed on the filter screen of the ink cartridge as the ink flows. As the dust increases, the filter screen of the ink cartridge will be clogged. This will cause the ink to flow poorly then cause the problems such as disconnection during printing. Therefore, the ink cartridge is not permanently used and needs to be replaced after a period of use.

2. The more times the print head is cleaned, the better.

TFP print headPrint head is the core component of an inkjet printer, so many people attach great importance to it and then frequently clean the nozzle. In fact, this is not true. As the saying goes, things will develop in the opposite direction when they become extreme. Frequent cleaning of the print head may damage the print head. The cleaning frequency of the print head is recommended once a month. It can usually clean by the “automatic cleaning function” provided by the inkjet printer.

3. Inkjet printers do not need to do anti-static.

sublimation printingStatic electricity is a very common kind of scene in daily life. It can not be ignored that the damage of static electricity for the precision instruments. Many users don’t know enough about the harm of static electricity, and they don’t do well for anti-static work on inkjet printers. If the inkjet printer does not do anti-static protection, it may cause the print head to jet ink. It will affect the print quality of the inkjet printer. When the static electricity on the inkjet printer cannot be exported and accumulates too much, it may even damage the electronic components such as the print head and circuit.

 

More information:
Website: www.subli-star.com
Company Name: Fei Yue Digital Technology Co.,LTD
Address: Central Road 323, Nanjing, Jiangsu, China
E-mail: sales@subli-star.com
Tel: 86-025-86628894
Whatsapp: +86 18351865850


Search Here

CONTACT US