Category : Blog
Maintaining safety while operating a large format heat press machine is crucial. When anything goes wrong, it affects the entire production. In many cases, technical fault led to devastating accidents in many industries.
Therefore, you need to take care of the safety concerns as you are working with a roller heat press machine.
- When you have to use an additional power cord from third party manufacturer, make sure the total numbers of Amps of both the additional and the original power cord is the same.If there are other devices plugged into the wall outlet, make sure you don’t exceed the ampere rating of that particular outlet.2.Power Cord
Power the large format heat press machine using the OEM cord only, which is supplied by the manufacturer. OEM cord is made for handling such an immense task. If you use third party cord and cable, it might not be able to handle the load and cause fire and electric shock.
Also, if the power cord or cable is damaged, contact the service center and replace it with OEM accessories only.
You must place the roller heat press machine on stable ground to prevent further disturbance while operating it. If the machine is tilted to some angle, it will affect the output quality.
There should be no blockage or covering of the openings of the roller heat press machine chassis whatsoever. Otherwise, the blockage will cause the machine to heat-up excessively and lead to poor production performance.