The Causes and Solutions for the Reduction of Image Adhesion of Inkjet Printer
Wet air affects the performance of machines and consumables at the same time. The most obvious expression is the image is wet and the adhesion is reduced. Therefore, the use and maintenance of the inkjet printer must be done in wet weather. Let’s share with you the following tips.
- Inkjet printer working environment space should pay attention to tide. Close doors and windows and other ventssooner or later. This can prevent external moisture to be absorbed into the room.
2. The cover of the main body of the inkjet printershould be properly covered to avoid the short circuit of the relevant circuit board and components caused by air humidity.
3. The related printing media materials should be paid attention to moisture-proof. Printing medium is easy to absorb moisture and be damp. And the print material of damp is easy to cause ink dispersing and so on. Therefore,put print materialback to the original packaging after each use and try not to touch the floor and walls.
4.The ink of the image printed by inkjet printer dry slow. Due to the weather is humidand the screen drying is slow, it takesa long time to wait. It is recommended that the user to open the inkjet printer print heating function or open the inkjet printer related drying equipment. This can speed up the image In particular, when the user needs to coat the screen, it is necessary to wait for the film to be completely dried. If the film immediately becomes blurred, the user may perform local heating and drying using a hair dryer or a heater.
5. If conditionpermission, it is recommended to use an exhaust fan in the inkjet printerworking environment. Or open air-conditioning dehumidification mode. If the humidity is too heavy, you can put some moisture absorbent in the house.
Learned the tips above will not only help improve work efficiency, but also help extend the service life of the inkjet printer and improve printing quality.