Digtal DTG printer needs to pay special attention to the problem of machine loss, the big problem is the loss of nozzle parts, so it is necessary to learn some maintenance skills:
1. Remove the circuit of digital printer, do not turn off the power switch or cut off the main power supply. This behavior can damage the service life of each system and nozzle.
2, free to add different batches of ink, or the use of substandard ink or cleaning liquid. Mixing two different ink configurations will change the color and quality of the ink. Poor quality ink can affect the spraying effect, clog the nozzle, and poor quality cleaning fluid may corrode the nozzle.
3. Vigorously clean the high-pressure air gun of the nozzle. If the nozzle is slightly blocked, it is recommended to vacuum the dust and then clean it carefully. Don’t do that.
4. Soak the whole nozzle in the cleaning solution. Cleaning liquid has a certain corrosive, so generally only take appropriate amount into the nozzle for cleaning.
5. Keep the cleaning liquid in the nozzle for more than 2 days and 2 nights. Soaking the cleaning solution over a long period of time can remove stains more effectively, but if more than 48 hours can affect the nozzle hole.
6. Clean the nozzle with your own non-quality inspection products. Nozzles are easy to contaminate and wear, so clean the nozzles using the manufacturer’s specified product and quality inspection product.