DTF-600series Eco Star III DTF Printer & Shaker
Feature: DTF ECO STAR III is a comprehensive & cost-effective digital transfer printing solution for garments.
If you are a garment manufacturer & supplier who is looking for a digital multicolor printing solution for garments at a very low price, this one is your best choice! New Generation PET Film Printing Machine with Powder Shaking integrates vinyl powder coating and drying into one machine. When the film/vinyl is dried out, it can transfer print onto any kind of garment.
Print Head: Epson I3200 print heads.
Max Print Size: 600mm Print Width.
Print Speed: 3.5-12m2/h
Ink Type: CMYK+W
Warranty: 24 months (Ink system, printheads and ink capping are not covered)
International Shipping: DHL,FedEX,By Air,By Sea
New Feature of DTF-600series ECO STAR III
DTF Eco Star III is equipped with the same core technology as Star III series, but the price is more acceptable. If you want to try new printing techniques and have a limited budget, then this one is your first choice!

Epson PrecisionCore® Printhead Technology
Printhead with 3200 nozzles for industrial-quality output at impressive production speeds. Stable and low maintenance time.

Smart Touch Panel
Intelligent operation panel, multi-language settings, easier operation, and effectively improve work efficiency.


White ink circulation system
The drying process can start immediately after printing. The white ink layer on top dries to the touch and is ready to receive a specialized powder adhesive coating.

Ink shortage alarm device
The ink shortage alarm device can add ink in advance, so as to avoid printing abnormalities caused by ink shortage.
Epson I3200-A1 Print Head
DTF-6003 ECO STAR III using Epson I3200 print heads. Epson I3200 head has 3200 nozzles, a resolution of 600npi, jetting frequency higher than DX5 and xp600, and also color saturation, printing speed, and printing accuracy are better, and the price is cheap. Very cost-effective

Model | I3200-A1 |
Ink Types | Water based ink |
Size(width x depth x height)(mm) | 69.1×59.4×35.6 |
Weight(g) | 82 |
Nozzle Numbers | 3200 |
Length Between Nozzles(inch) | 1/300(in one row) |
Nozzle Row | 8row |
Max color/head | 4colors |
Resolution | 300npi/1row 600npi/2row |
Effective Printing Width(mm) | 33.8 |
Jet Freqency(kHz) | 43.2(single dot), 21.6(multi dot) |
Ink Drops(pl) | 3.8-6-12(9.4) |
Ink Viscosity(mPa.s) | 3~4 |
Professional Features
- With three-stage heating in the front, middle, and rear, the drying process can start immediately after printing. The white ink layer on top is dry to the touch and can accept a specialized powder adhesive coating.
- The continuous circulation of white ink can effectively prevent precipitation and reduce the probability of clogging the print head. After effective filtration, it can effectively prolong the service life of the print head and save costs.
- The anti-collision function of the trolley can effectively protect the nozzle, greatly delay the damage of the nozzle, prolong the use time of the nozzle, and save the production cost.
- Using Japan's high-precision mute guide rail, the operation is more stable and the noise is low.
- Intelligent operation panel, multi-language settings, easier operation, and effectively improve work efficiency.





Machine Parameter
DTF-6003 ECO STAR III PET Film Inkjet Printer | ||||
Item Model | DTF-6003 ECO STAR III | |||
Print Head | Using Epson print head, including 400 nozzles/row*8*lines, high quality up to 1800dpi | |||
Print Resolution/Speed | 4Pass: 14㎡/hour | |||
6Pass: 9㎡/hour | ||||
8Pass: 7㎡/hour | ||||
Media | Maximum Width | 610mm | ||
Thickness | 1.5mm to 6mm adjustable | |||
Max Roll Weight | 20kg | |||
Types | PP Synthetic Paper, VinylSheet, Film, Coated Paper, Canvas, Adhesive Vinyl Sheet, Banner and so on. | |||
Media Heater | Front/Mid/Rear Heater(individually controllable) | |||
Interface | Network port | |||
RIP Software | Maintop 6.1, Photoprint, | |||
Voltage | AC110V+/- 10%, AC220V+/-10%, 50/60+/HZ | |||
Operating Environment | Temperature: 20℃- 35℃, Humidity: 35%RH-65%RH | |||
Power | 200W-450W | |||
Dimensions | 1620*740*1350mm(L*M*H) | |||
Height of Worktable | 1062mm | |||
Package size | 1710*760*1440mm(L*W*H) | |||
Net Weight | 140KG | |||
Gross Weight | 200KG | |||
DTF Powder Shaker and Dryer(S8) | ||||
Model: | S8-600 | |||
Operation mode: | PLC Touch Screen | |||
Max Width: | 600mm | |||
Oven Length: | 1079mm | |||
Oven Temp: | 0-400°C (be adjustbale) | |||
Voltage: | 110v/220v, 3phase, 60Hz | |||
Power: | 4KW | |||
Shaker Size: | 1850mm L x 1150mm W (with Air Filter) x 1050mm H | |||
Shaker Weight: | 320kg |
BUY 1 GET More !
DTF Starter Kit Includes: Film: 0.6m*100m/0.3m*100m roll size
DTF Powder: 2 kg (4.4 lbs)
DTF Ink: 1000ml*5 (c,m,y,k+w)
Rip software: Flexi Print/Maintop
Sublistar DTF environment settings
Sublistar DTF instructional video

Samer –
Dear
Can I get quotation
Martin –
Hi Samer, thank you for your interest in Sublistar DTF printer, our DTF printer consultant will reach out you soon.