DTF Hot Melt Powder
Powder for DTF Printer
Classification
Soft DTF Powder, Rough DTF Powder, Anti-stretch DTF Powder, Anti-sublimation DTF powder, Breathable DTF powder
Feature
DTF powders are specially designed to use with DTF printing. The powder come with 1kg, 5kg, 20kg, 25kg. Packaging is divided into bags and barrels.
The Feel of clothes depended on the type of powder you are using and the thickness of your ink layer. Our soft and stretchy DTF powder has better hand than traditional vinyl or other types of heat transfer. It’s elastic and soft to the touch.
Our DTF powders are slow drying and easy to cold tear. This revolutionary technology will help you get excellent transfer printing results.
- Superior Soft Hand Feel
- Great Wash Resistance
- Stretchability
| Classification | Feature |
| Soft DTF Powder | Particle size 80-170um , easy to melt, soft and smooth after transfer, suitable for smooth and flat fabrics, such as T-shirts, sweaters, sweaters, polo shirts |
| Rough DTF Powder | Particle size 120-250um，easy to melt，after transfer, the hand feel is obvious. It is suitable for rough fabrics, such as denim, non-woven fabrics, and linen. |
| Anti-stretch DTF Powder | This powder is very fine, easy to melt, the transfer finished product is stretch-resistant, suitable for stretch fabrics |
| Anti-sublimation DTF powder | Using to block clothing colors or patterns that may be visible through transfer. easy to melt, Suitable for dark fabrics |
| Breathable DTF powder | Breathable DTF powder provides a more breathable print with a smooth feel and softness |
Testing Condition:
Transfer Temperature: 130-160℃ Transfer Time: 8-15 seconds
About Storage:
In order to protect unused sublimation paper, it is recommended to store it in its original packaging, in the poly bag at 68°F -82°F( 20°C -28°C) and 40-60% RH.
About Printing:
Image side is wound to the outside of the paper. Printing is performed in ″mirror″ image. Allow the printing ink to dry before transferring.
Request Powder Sample
Soft and elastic powder with a warm feeling. Our DTF powder very suitable for T-shirt printing. If you are not sure, please order a small sample first.
Classification
Soft DTF Powder
Particle size 80-170um , easy to melt, soft and smooth after transfer, suitable for smooth and flat fabrics, such as T-shirts, sweaters, sweaters, polo shirts
Rough DTF Powder
Particle size 120-250um，easy to melt，after transfer, the hand feel is obvious. It is suitable for rough fabrics, such as denim, non-woven fabrics, and linen
Anti-stretch DTF Powder
This powder is very fine, easy to melt, the transfer finished product is stretch-resistant, suitable for stretch fabrics
Anti-sublimation DTF powder
Using to block clothing colors or patterns that may be visible through transfer. easy to melt, Suitable for dark fabrics
Breathable DTF powder
Breathable DTF powder provides a more breathable print with a smooth feel and softness
Features
- DTF powder is specially used for DTF printing. Our powder has excellent adhesion, excellent washability, and can accurately adhere to ink rather than film.
- This powder can be cured at 150C or 300F and pressed for 10-20 seconds. Press the completed transfer again for 10 seconds, and put a piece of parchment paper on it to get a better feel.
- This powder can be cured in an oven using a hot air gun or under a hot press.
-
Process to using the powder:
1. Place the transfer paper on a hot-pressed pillow or hot-pressed foam.
2. Lower the top heating plate until it is about 1 cm away from the transfer.
3. Solidify the powder at 160C for about 2 minutes or until melted. At first it will become sparkling. Then it will melt and form a flat surface.
English
العربية
简体中文
Nederlands
Français
Deutsch
Italiano
Português
Русский
Español
Türkçe