EN 
ES 
ZH 
DTF Print head
Top 4 Reasons Lead to DTF Printhead Clogging
- Ink drying on the print head’s surface might cause a blockage, preventing ink from flowing through the nozzles. DTF Printheads clogging can happen if the printer is not used for an extended period of time or if the ink cartridges are left open to the elements.
- Impurities: Clean ink is required for inkjet printers to flow through the print head. Impurities or particles in the ink might clog the nozzles and cause blockages. This can occur if ink cartridges are not properly stored or if the printer is utilized with low-quality or expired ink.
- Maintenance: Inkjet printers require routine maintenance to keep the print head clean and clear of clogs. Ink can build up and cause blockages if the printer is not cleaned on a regular basis or the maintenance cycle is not run as instructed.
- Inkjet printer print heads can become damaged over time due to wear and tear or if the printer is misused. This can result in ink blockages or uneven ink flow, resulting in poor print quality or even printer damage.
if the printhead has already clogged
If the printer has stopped working due to the printhead clogging issue, or the print quality and performance have been impacted, read Printhead Cleaning Solution for 5 Most Common Conditions to find the most helpful information.
6 helpful tips to prevent the DTF Printhead clogging
- Invest in high-quality ink cartridges: Impurities or particles in low-quality ink cartridges might jam the print head. Blockages can be avoided by using high-quality, manufacturer-recommended ink cartridges.
- Maintain the printer’s cleanliness: Clean the printer’s exterior and interior, including the print head, on a regular basis to keep dust, dirt, and other debris from clogging the print head.
- Use the printer on a regular basis: If the printer is not used for an extended period of time, the ink can dry and harden. Regular use of the printer can assist keep the ink flowing and prevent clogs.
- Maintain your printer: Most inkjet printers include a maintenance cycle that can help you avoid clogs and other problems. To maintain the printer working smoothly, conduct the maintenance cycle according to the manufacturer’s instructions.
- In order to prevent drying or evaporation of the ink, ink cartridges should be stored in a cool, dry environment.
- Handle the printer with care: Rough handling or incorrect ink cartridge installation might harm the print head, resulting in clogs or other issues. Follow the manufacturer’s handling and installation instructions.
Is white ink the most tough part for DTF printer?
Because of its particular qualities, white ink in DTF printing might be more difficult to work with than other colors. White ink is often thicker and heavier than other colors, which might cause some issues. Here are some of the most typical problems that can occur while using white ink in DTF printing: Because of its thicker consistency, white ink is more prone to clog the print head than other colors.
If the printer is not used for an extended period of time, white ink might deposit in the ink lines or ink cartridges, causing clogs or other problems.
Uneven printing: To obtain the necessary opacity, white ink may take additional passes or a higher ink volume, which might result in uneven printing or smudging.
White ink may not adhere as well with the film or substrate as other colors, resulting in the print peeling or breaking.
To prevent these issues, use high-quality white ink that is specifically intended for DTF printing. We have included a white ink stirring function to the DTF printer, which can mix the ink in the white ink bottle on a regular basis to ensure that the white ink is consistent. In addition, we can add a white ink circulation function to the DTF machine, so that the white ink enters the ink tube first, then circulates once before reaching the print head, preventing the white ink from settling. In addition, we intend to install a white ink filter mechanism to prevent big particles from blocking the print head.
