24“ Direct To Film (DTF) Printer

24“ Direct To Film (DTF) Printer

24“ Direct To Film (DTF) Printer

用于 DTF 打印系统的 DTF 打印机
Suitable for Model DTF-60 ULTRA Series

特征

24″ Direct To Film (DTF) Printer is designed to imitate the arc shape of the flame. This design is novel to give customers the best and most beautiful design and user experience！

Sublistar DTF 打印机的优点

如果您正在寻找一流且价格实惠的 DTF 打印机来满足您的批量打印需求，Sublistar 将是您的最佳选择。

先进的白墨循环系统

白色墨水循环系统可防止沉积物导致喷嘴堵塞。缺墨自动报警，减少空印损失。

墨水系统内置加热器

内置加热器增强了打印面积，可以在低温下实现更好的油墨附着力和固化，避免油墨渗色。

高品质机板

为打印注入强劲稳定的动力，使其寿命更长久，质量更稳定。

高质量的打印输出

它与白色完美搭配。其出色的色彩表现使其充满活力且耐用。

技术规格

ULTRA II DTF PET Film Inkjet Printer
项目型号		DTF-6002 超 II
打印头		采用爱普生打印头，包含400个喷嘴/行8线，高品质高达1800dpi
打印分辨率/速度		4Pass: 12㎡/hour
		6Pass: 8㎡/hour
		8趟：6㎡/小时
媒体	最大宽度	610毫米
	厚度	最大可调范围 1.5mm 至 6mm
	最大卷重	20公斤
	类型	PP Synthetic Paper, Vinyl Sheet, Film, Coated Paper, Canvas, Adhesive Vinyl Sheet, Banner, and so on.
介质加热器		前/中/后加热器（单独控制）
界面		网络端口
图像处理软件		蒙泰 6.1，照片打印，
电压		AC110V+/-10%、AC220V+/-10%、50/60+/HZ
操作环境		温度：20℃- 35℃，湿度：35%RH-65%RH
力量		200W-450W
方面		16207401350mm（长米高）
工作台高度		1062毫米

机器详情

1. With three-stage heating in the front, middle, and rear, the drying process can start immediately after printing. The white ink layer on top is dry to the touch and can accept a specialized powder adhesive coating.

2. The continuous circulation of white ink can effectively prevent precipitation and reduce the probability of clogging the print head. After effective filtration, it can effectively prolong the service life of the print head and save costs.

3. The anti-collision function of the trolley can effectively protect the nozzle, greatly delay damage to the nozzle, prolong the use time of the nozzle, and save production costs.

4. Using Japan’s high-precision magnetic guide rail, the operation is more stable and the noise is low.

5. Intelligent operation panel, multi-language settings, easier operation, and effectively improved work efficiency